Material brief

THERMOLITE — Quick specification

Purpose
Make an insulation request specific enough to review

Quick specification

Quick specification — compare at least four dimensions
Dimension Review question Evidence or next step
Composition Which insulating fiber or blend is named? Ask for the declaration that matches the specimen
GSM Does a batting or fabric mass need a target and a tolerance? Keep the unit and the specimen with the figure
Usable width Is there a sheet to cut, and where does the selvedge stop? Confirm width only for that sheet format
Finish Is a treatment, bond, or face fabric already on the sample? Note the sample state before durability language
Linear density Which denier or dtex applies to the fiber or yarn? Do not convert that unit into a yarn count
Read the brief preparation guide

Make the fiber identifiable

Open with a composition line, a construction note, or the sample you already have. The word insulation locates the topic. It does not identify a filament, a batt, or a cloth. Add any bonding or face-fabric context so a similar-looking item is not mistaken for the one you mean. If the only clue is a garment label, say that the label is a starting point and that the fiber specification is still incomplete.

Keep units from colliding

Area mass and cuttable width need their own units, and they apply when the object is a batting sheet or a fabric. A cone of fiber does not inherit a cloth width. Linear density stays in denier or dtex. If a buyer says 100 gram insulation, write it as a layer-mass target and stop there. This guide does not attach a temperature rating to that mass, because rating language needs a garment build, a method, and a specimen that are not on file here. An unknown cell should stay blank.

Put the practical frame beside the fiber

Use, process, quantity, and destination describe the request. They frame the next message. They do not prove availability, a minimum order, or a ship date. A micro construction and a fleece construction can share a marketing neighborhood and still differ in fiber form and knit. Name the one in your hand. If wool is the comparison, name the property you care about and the wool reference, then leave the outcome for a specimen review rather than a slogan.

Send one next question

A short brief can still be exact. List what you know, what is missing, and what the next specimen should clarify. When you already hold a report, copy the method name and the specimen condition into the message. The request should ask for the missing fact. It should not present that fact as a property already confirmed for every package that uses the fiber name. Packing questions belong in the same note only for the format that fits: cone, package, or cut length.

Hold two answers open at once

Natural fiber and synthetic fiber briefs start from different priorities. Wool is often kept in the conversation for handle and moisture take-up. An insulating synthetic fiber is often kept for drying and for loft after the layer is compressed. Write the property you need. Do not turn the pair into a winner, and do not treat either choice as an environmental score.

Barrier build has the same split. A coated cloth is checked for coating add-on, adhesion, and softness. A laminated cloth is checked for film, peel, and specimen state. Liquid resistance is a hydrostatic head reading, often ISO 811 when that method is the one on the report. Moisture movement is a water vapor transmission or vapor-resistance reading, often ISO 11092. Air permeability is a separate figure. Mass of a fabric, when you have a sheet, is read in g/m², and ISO 3801 is one method name buyers use for that mass. Usable width is the cuttable centimetre measure inside the selvedge. One denier is 1 gram per 9,000 metres. One dtex is 1 gram per 10,000 metres. Composition shares are percent by mass and should sum to 100%. A 100 g/m² layer target is still only a mass target.

Three limits stay on the sheet even after the units are clear. This guide does not publish a temperature rating, a sample-availability promise, or a certificate number. Abrasion resistance under ISO 12947 and pilling under ISO 12945-2, if a later report uses those methods, still do not describe handfeel. Colorfastness needs its own wash or light condition. Stock and custom work also stay separate: a stock note needs the lot, and a custom note needs the shade band or lab dip plus the approval point before bulk. Roll inspection, when the format is a roll, is a length and defect check in metres, not proof that the roll is in a warehouse.

Send this specification

Keep the reading notes beside the comparison

Use this page to prepare a question, not to supply a measured result. Write the known material reference first, then the decision that is still open. Method, specimen and scope stay attached to any figure that is already in hand. Unknown points stay questions.

Notes to keep with the page
NoteWrite thisLeave this open
MaterialComposition, construction and finish if knownAny value that has not been confirmed
DecisionThe comparison or approval the inquiry needsA conclusion the record does not support
EvidenceMethod, specimen and scope when a report existsA label used without that context
Next stepThe sample or document that would resolve the questionA promise about stock, certification or capacity